A-A-52424B
5 5.2 Contractor certification. The contractor shall certify and maintain substantiating evidence that the product offered meets the salient characteristics of this CID and that the product conforms to the producer’s own drawings, specifications, workmanship standards, and quality assurance practices. Items with known defects shall not be submitted for Government acceptance. The Government reserves the right to require proof of such conformance prior to the first delivery and thereafter as may be otherwise provided for under the provisions of the contract.
6. PACKAGING. Preservation, packing, and marking shall be as specified in the contract or order (see 7.2).
7. NOTES
(This section contains information of a general or explanatory nature that may be helpful, but is not mandatory.)
7.1 Addresses for obtaining copies of referenced documents.
7.1.1 Government specifications and standards. Copies of A-A-52521, Filler Neck: Radiator (Metric), are available online at https://assist.daps.dla.mil/quicksearch/ or from the Standardization Document Order Desk, 700 Robbins Avenue, Building 4D, Philadelphia, PA 19111-5094.
7.1.2 Non-Government publications. Copies of ASTM A466/ A466M “Standard Specification Weldless Carbon Steel Chain”; ASTM B117 “Standard Test Method of Salt Spray (Fog) Testing”; and ASTM B633 “Standard Specification for Electrodeposited Coatings of Zinc on Iron and Steel”; are available online at www.astm.org or from ASTM International, 100 Barr Harbor Drive, West Conshohocken, PA 19428-2959.)
7.2 Ordering data. Acquisition documents must specify the following:
a. Title, number, and date of this CID.
b. If required, the specific issue of individual documents referenced.
c. Selection of applicable level and packaging requirements (see 6).
d. Part or identification number.
For Parts Inquires call Parts Hangar, Inc (727) 493-0744
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business